Touareg V8-4.2L (BHX) (2004)
-
Remove inner portion of seal extractor (2085) several rotations from outer portion and secure with knurled-head bolt.
-
Lubricate threaded head of seal extractor, position and with forced pressure install oil seal as far as possible.
-
Loosen knurled bolt and turn inner part against adapter (2085/1) until seal is removed.
-
Secure seal remover in a vise at flat spots. Remove seal using pliers
-
Then press in new seal using seal installer (3241/1) and bolt (3241/3) so it sits flush.
The rest of assembly is basically a reverse of disassembling sequence.