Touareg V8-4.2L (BHX) (2004)
Similar screen appears:
The previous data in the ECM is erased and the new data is being transferred to the module from the flash CD.
Tip:
If, during the "Update - Programming", a fault message is displayed:
-
Confirm that VAS 5051 or VAS 5052 diagnostic tool power supply is adequate and that ALL appliances with high electromagnetic radiation (i.e.
mobile phones) are switched OFF.
-
The "Update - Programming" (flashing) process must then be started from the beginning using the "Repeat" button (arrow). DO NOT use the
"Cancel" button.
Note:
On NO occasion should the "Cancel" button be selected.
Once "Update - Programming" (flashing) is complete: