Touareg V8-4.2L (BHX) (2004)
^
Similar screen appears.
^
ECM Part Number and old software level is still displayed at (arrows).
Tip:
New software level is not displayed until process is complete and fault memories have been erased.
-
Select the "Print", then "Screen" button.
-
Attach print to vehicle Repair Order.
Once "Update - Programming" (flashing) is complete, the control module must be re-initialized.
-
Select the --> button.
^
The tester requests you to switch the ignition OFF.
-
Switch ignition OFF.
^
The tester requests you to switch the ignition ON.
-
Switch ignition ON when prompted. After switching ignition ON, the ECM has been re-initialized, however, fault memories must now be erased.
-
Select the "Continue button"
Fault memories, erasing after "Update - Programming" (flashing)
Due to the CAN bus system, fault messages will be stored in various Control Modules during programming.