Touareg V8-4.2L (BHX) (2004)
Cylinder bank 1 and 2
-
Also check wires for short circuit to each other.
Specified value: infinite ohms
-
Erase DTC memory of Engine Control Module (ECM) , Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
If no malfunctions are found in the wires and there was voltage between terminals 1 + 3:
-
Replace the respective Camshaft Position (CMP) sensor:
Cylinder bank 1
‹› Camshaft Position (CMP) Sensor (G40) ,
Cylinder bank 2
‹› Camshaft Position (CMP) Sensor 2 (G163).
-
Erase DTC memory of Engine Control Module (ECM) , Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
If no errors are found in wires and there was no voltage between terminals 1 + 3:
-
Replace Engine Control Module (ECM).