Touareg V8-4.2L (BHX) (2004)
Installing
-
Installation is performed in the reverse order of removal.
-
Turn on ignition.
CAUTION: Make sure that no persons are in the vehicle.
-
Connect battery ground (GND) strap.
Front Airbag Crash Sensors
Front Airbag Crash Sensors
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
CAUTION!
Observe safety precautions for working on airbags --> [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag Systems/Service
Precautions/Technician Safety Information.
-
Disconnect batteries.
-
Remove front bumper
-
Remove two nuts - 1 - (9 Nm).
-
Disconnect the wiring harness - 3 - from the crash sensor - 2 -.