Touareg V8-4.2L (BHX) (2004)
-
Disconnect multi-pin harness connectors - 2 - and remove housing gasket - 1 - upward out of E-Box.
‹› The number of multi-pin harness connectors - 3 - and number of threaded connections - 1 - can deviate from the illustration depending on vehicle
equipment.
-
Loosen threaded connections - 1 - of supply wires and remove them from connecting pins.
-
Unclip connector - 2 - from E-Box.
-
Disconnect multi-pin harness connectors - 3 - and remove housing gasket - 4 - upward out of E-Box.
-
Remove mounting bolts - arrows - from upper section of E-Box.