Touareg V8-4.2L (BHX) (2004)
-
Strip ends of repair wire and of vehicle-specific single wire using 6 - 7 mm wire stripper.
-
Crimp the stripped ends of repair wire and single wire of vehicle-specific wiring harness using crimp pliers and a crimp connection.
‹› Make sure that crimp connections do not lie directly next to each other when several wires need to be repaired. Arrange crimp connections at a
slight offset so that the circumference of the wiring harness does not become too large.
‹› In the event the repair point was previous taped, this point must be taped anew with yellow insulating tape after repairs.
‹› Secure the repaired wiring harness if necessary with a cable tie to prevent flapping noises while driving.
Crimping Pliers VAS 1978/1A VAS 1978/1A