volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Relays and Modules - Starting and Charging > < Ignition Key - Emergency Release Procedure|Page 10241
Page 1
background image

Start / Stop Switch: Service and Repair

Access/Start Authorization

Access/Start Authorization Button

‹› The access/start authorization button (E408) allows the vehicle to be started without actively using the ignition  key.

Removing

-

Switch off ignition, switch off all electrical consumers and remove  ignition key.

CAUTION!
When disconnecting battery, procedure must always be followed as described  in the reinformation anual --> [ Battery, with Auxiliary
Battery or Two-Battery Layout, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and Replacement/Battery,
with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting. Not adhering to sequence  will result in the deactivation
of Main Battery Switch -E74- and subsequent  damage to electrical system components.

-

Disconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and
Replacement/Battery, One-Battery Layout, Disconnecting and Connecting.

-

Remove gear selector cover --> Body Interior 68 Removal and Installation. 

-

Remove screws - arrows -.

-

Disconnect electrical connector.

-

Remove Access/Start Authorization Button (E408).

Installing

Install in reverse order of removal, noting the following:

‹› Adaptation or coding of Access/Start Authorization Button  (E408) after removing and installing is not necessary.

Relays and Modules - Starting and Charging > < Ignition Key - Emergency Release Procedure|Page 10241