Touareg V8-4.2L (BHX) (2004)
Lines and wires must not be mixed up when connecting!
-
Check whether color marking is present on front in driving direction. If no longer present, apply a new one.
-
When loosening hydraulic lines, counter hold using open-end wrench.
Continuation for All
-
Remove coupling rods from stabilizer bar.
-
Remove strut from lower control arm.
-
Subframe, locating. Refer to --> [ Subframe, Securing ] See: Subframe, Securing.
-
Install insert of floor jack in engine and transmission jack (VAG 1383 A).
-
Place engine and transmission jack (VAG 1383 A) and a block of wood - A - under engine carrier and press lightly against.
-
Remove bolts - 1 and 2 - for subframe.