Touareg V8-4.2L (BHX) (2004)
/Page-2644002.png)
-
Install upper support - 2 - in upper spring plate - 1 -.
The raised part - arrow A - must line up with the depression - arrow B -.
-
Set coil spring on lower spring holder VAS 6046/3.
-
Make sure the coil spring is properly seated in spring holder VAS 6046/3 - arrow -.
-
The upper spring plate must be set on spring so that the raised part - arrow - is located opposite the attachment for link - 1 -.
The center lines - A - and - B - must run parallel to one another.
