Touareg V8-4.2L (BHX) (2004)
Actuator: Service and Repair
Differential Lock Motor
Differential Lock Motor
Special tools, testers and auxiliary items required
‹› Torque wrench (VAG 1331)
Removing
-
Separate the two connectors at differential lock motor.
-
Remove the differential lock motor - A - with holder for connector - B -, thereby removing the four bolts.
Installing
-
Replace O-ring - arrow - on differential lock motor
‹› Differential lock motor is delivered as a replacement part with O-ring installed.
‹› O-ring is secured with a protective sleeve.
‹› You must remove protective sleeve before installing differential lock motor.
-
Set the differential lock motor - A - with holder for connector - B - into the rear final drive, and install the four bolts.