Touareg V8-4.2L (BHX) (2004)
Transmission Position Switch/Sensor: Adjustments
Multi-function transmission range (TR) switch F125, removing, installing and adjusting
Special tools, testers and auxiliary items required
^
Setting gauge T10173
^
Torque wrench V.A.G1 331
Removing
For clarity, the transmission is shown removed throughout this procedure.
-
Shift selector lever into "P" position.
-
Remove cap nut - 4 -.
-
Remove cover - 3 - from selector shaft.
-
Carefully bend hooks of circlip - 1 - using a screwdriver.
Note:
^
If one hook breaks, the circlip must be replaced.
-
Remove nut - 2 - and circlip - 1 - from selector shaft.
-
Disconnect connector from multi-function Transmission Range (TR) switch F125.
-
Remove and remove multi-function transmission range switch - arrow A - from selector shaft.
Installing and adjusting multi-function TR switch
-
Shift lever/selector shaft on transmission to position "N".
-
Install Multi-Function Transmission Range (TR) Switch F125 onto selector shaft.