Touareg V8-4.2L (BHX) (2004)
-
Set the solenoid into the mount of the shift mechanism at a slight angle.
-
Attach the lever - 2 - to the locking lever - 1 -.
-
Push the solenoid into the shift mechanism until the limit stop, and it is locked into its mounting - arrow -.
-
Make sure that the solenoid is locked in its mount - arrow - up to the limit stop and the lever - 2 - engages the locking lever - 1 -.
-
Install the shift mechanism. Refer to --> [ Selector Mechanism ] See: Shifter A/T/Service and Repair/Removal and Replacement/Selector
Mechanism.
Shift Lock Solenoid
Shift Lock Solenoid
Removing
-
Remove the shift mechanism. Refer to --> [ Selector Mechanism ] See: Shifter A/T/Service and Repair/Removal and Replacement/Selector
Mechanism.
-
Release connector and disconnect.
-
Release the solenoid from its mounting and pull straight out from the locking lever - 1 - and shift mechanism.