Touareg V8-4.2L (BHX) (2004)
-
Insert new circlip in groove of flange shaft, being careful not to overstretch circlip.
-
Drive in flange shaft using a plastic head hammer.
-
Install front final drive. Refer to --> [ Front Final Drive ] See: Rear Final Drive/Service and Repair/Removal and Replacement/Front Final Drive.
-
Check gear oil in front final drive. Refer to --> [ Gear Oil Checking ] See: Rear Final Drive/Final Drive Fluid/Service and Repair/Gear Oil
Checking.
Dust Cap for Flange Shaft, Replacing
-
Press off dust cap - B - from flange shaft.
A Separating device 22 to 115 mm, e.g. Kukko 17/2
-
Press dust cap - A - onto flange shaft.
Set the sleeve (3301/3) in place with the recess - arrow - facing toward the dust cap - A -.