Touareg V8-4.2L (BHX) (2004)
‹› When removing, make sure to pry off complete Rain Sensor (G213) or Rain/Light Recognition Sensor (G397) and not only the upper casing of
Rain Sensor (G213) or of Rain/Light Recognition Sensor (G397).
Installing
Install in reverse order of removal, noting the following:
‹› Always clean windshield surface inside bracket for Rain Sensor (G213) or Rain/Light Recognition Sensor (G397) before installing.
‹› Surface (connecting pads) of Rain Sensor (G213) or Rain/Light Recognition Sensor (G397) must not be soiled when installing.
‹› If the surface (connecting pads) of Rain Sensor (G213) or Rain/Light Recognition Sensor (G397) is soiled, it may be possible to clean it by
"applying" and then "removing" one or more adhesive strips.
‹› After installing Rain Sensor (G213) or Rain/Light Recognition Sensor (G397), there must be no air bubbles between windshield and surface
(connecting pads).