Touareg 2 V6-3.6L (BHK) (2008)
If this is not the case, paddles must be corrected accordingly via clamping screws on the wheel pick-ups.
-
Hold the distance laser for distance measurement firmly by hand in the angled bracket on the calibration device with the laser beam visible on the
paddle. Now press the ON button briefly for the distance measurement. When doing this, the following display appears on screen:
The distance measurement is specified on the display in "meters ".
-
Note the value read off.
-
Repeat measuring procedure in the same manner for the other rear wheel on the other side of the calibration device.
The distance value must be the same on both sides. If the value is not identical, align the calibration device only as long until the values on both sides
are identical.
When aligning the calibration device, make sure the line laser laser beam still strikes the center above the VW logo and the indictor in the level stays
centered. If necessary, make further corrections accordingly.