Touareg 2 V6-3.6L (BHK) (2008)
-
Push the lines - 7 - onto the connections - arrow a - until clips snap downward - arrow b - and engage.
-
Make sure the lines - 7 - are securely attached to the connections - 4 - on the hydraulic pump.
-
Connect connector - 6 -.
-
Fold noise insulation - 3 - together and position bracket - 2 -.
-
Tighten bolts - 1 -, tightening specification: 60 Nm.
Hydraulic Rear Lid Drive Motor Hydraulic Cylinder
Rear Lid
Hydraulic Rear Lid Drive Motor Hydraulic Cylinder
Removing