Touareg 2 V6-3.6L (BHK) (2008)
Cowl Moulding / Trim: Service and Repair
Windshield Wiper System
Plenum Chamber Cover, Removing
-
Release the retainers - arrows - of the plenum chamber cover by turning them 90°.
-
Carefully lift cover - 1 - slightly until harness connector for Sensor for air quality (G238) can be disconnected.
-
Remove the cover.
‹› Plenum chamber cover is inserted below windshield in a guide rail.
‹› For reasons of clarity, illustration shows plenum chamber already removed.
-
Loosen twist locks - 1 - of cover by a 90° turn.
-
Carefully unclip plenum chamber cover upward - arrows -.
Windshield Wiper System
Plenum Chamber Cover, Installing
-
Install plenum chamber cover in reverse sequence.