Touareg 2 V6-3.6L (BHK) (2008)
2. Support ring (T10301/4)
3. Tube (T10301/3)
4. Hydraulic press (VAS 6178) with pressure head (T10205/13)
5. Nut (T10301/2)
6. Spindle (T10301/1)
Chamfer on outer diameter of supporting ring (T10301/4) must face subframe.
-
Press out bonded rubber bushing.
CAUTION!
Secure hydraulic cylinder (VAS 6178) while pressing out.
Installation Position
- Arrows - point in direction of travel.
Holes - A - longitudinal to direction of travel
Seams - B - perpendicular to direction of travel
Installing Bonded Rubber Bushing
-
Install tools as shown in the illustration.