Touareg 2 V6-3.6L (BHK) (2008)
/Page-1962006.png)
-
Lift positioning pin - 2 - using narrow pliers and slide out in direction of arrow.
-
Pull off the securing clip - 1 - and pull the lock cover - 2 - in direction of - arrow - out of the positioning pin - 4 -.
-
Pry off retaining ring - 3 - using a small screwdriver.
-
Using a rubber hammer, carefully tap lock cylinder - 2 - out of lock cover - 1 - from rear.
