Touareg 2 V6-3.6L (BHK) (2008)
Seat Bottom Frame: Service and Repair
Rear Seats
Rear Seats
Mounting Bracket
Removing
-
Fold right seat cushion forward.
-
Remove bolts - 1 -, - 2 - and - 3 - (20 Nm).
‹› The bolts are microencapsulated and must therefore be replaced after every removal.
‹› Before installing the new bolts, the threads of the corresponding nuts must be cleaned.
-
Remove mounting bracket from vehicle.
Installing
-
Perform the steps used for removal in reverse order.
‹› During installation, bolts must be installed in the order - 1 -, - 2 - and - 3 -. The torque is 20 Nm.