Touareg 2 V6-3.6L (BHK) (2008)
-
Open the bracket for spare wheel - 1 -.
-
Remove spare wheel.
-
Remove gas strut - 4 -, refer to --> [ Gas Strut ] See: Doors, Hood and Trunk/Hood/Service and Repair/Hood.
-
Disconnect the connector - 2 -.
-
Remove the nuts - 3 - and remove the spare wheel mount - 1 -.
Installing
To install, perform the steps used for removal in reverse order.
-
Tightening specification: Hex nuts - 3 - 40 Nm.
Lock Carrier
Removing
-
Remove the rear lid trim panel.