Touareg 2 V6-3.6L (BHK) (2008)
/Page-400004.png)
‹› Sealant (D 176 501 A1) hardens quickly.
-
- 1 - Slide cover at a slight angle onto camshaft adjustment valves. Ensure cylinder head cover seal is not pressed back.
-
- 2 - Press cover up and under cylinder head cover seal. Then press cover against cylinder head and onto alignment pins.
-
Make sure the cylinder head cover seal - arrows - is seated correctly. It must not be pushed back.
-
First install all bolts - arrows - and tighten lightly.
