Touareg 2 V6-3.6L (BHK) (2008)
-
Camshaft adjustor with timing chain for camshaft drive, installing. Refer to --> [ Camshaft Adjuster with Camshaft Drive Timing Chain, Installing
] See: Variable Valve Timing Actuator/Service and Repair/Camshaft Adjuster with Camshaft Drive Timing Chain, Installing.
-
Clean sealing surface on cover piece as well as on cylinder head.
-
If seals in timing chain cover are to be replaced. Refer to --> [ Camshaft Adjuster Valve Seal, Installing ] See: Seals and Gaskets/Variable Valve
Timing Actuator Seal/Service and Repair.
-
Coat sealing surface of cover piece with sealant (D 176 501 A1) and install immediately.
‹› Sealant (D 176 501 A1) hardens quickly.
-
First install all bolts - arrows - and tighten lightly.
‹› Bolts - A - are not on vehicles with mechanical vacuum pump.
-
Then tighten bolts to 8 Nm.
-
Install the chain tensioner for the camshaft timing chain and tighten to 40 Nm.
-
Install vacuum pump, if present. Refer to --> [ Mechanical Vacuum Pump ] See: Brakes and Traction Control/Power Brake Assist/Vacuum
Pump/Service and Repair/Mechanical Vacuum Pump.
-
Install cylinder head cover. Refer to --> [ Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair.
-
Install intake manifold. Refer to --> [ Intake Manifold ] See: Intake Manifold/Service and Repair/Intake Manifold.
-
Reset lock carrier service position. See: Body and Frame/Lock Carrier