Touareg 2 V6-3.6L (BHK) (2008)
Crankshaft Seal Retainer: Service and Repair
Sealing Flanges and Drive Plate Assembly Overview
‹› Secure engine to engine and transmission stand (VAS 6095) when working on engine.
1
100 Nm + 1/2 turn (180°)
‹› Loosening and tightening, refer to --> [ Loosening and Tightening the Vibration Damper Bolt ] See: Service and Repair/Cylinder Block,
Vibration Damper and Lubrication Components Overview
2
Vibration damper
‹› To remove and install, secure with the counter holder tool (T10069), refer to --> [ Loosening and Tightening the Vibration Damper
Bolt ] See: Service and Repair/Cylinder Block, Vibration Damper and Lubrication Components Overview
3
10 Nm
4
Seal
‹› Integrated into sealing flange --> [ (Item 5) Sealing flange ] , cannot be replaced separately, refer to --> [ Sealing Flange, Vibration Damper
Side ] See: Seals and Gaskets/Front Crankshaft Seal/Service and Repair.
5
Sealing flange
‹› Replacing, refer to --> [ Sealing Flange, Vibration Damper Side ] See: Seals and Gaskets/Front Crankshaft Seal/Service and Repair.
‹› Coat sealing surfaces with sealant (D 176 501 A1).
6
Cylinder block