Touareg 2 V6-3.6L (BHK) (2008)
-
Insert thecamshaft bar (T10068 A) into both shaft grooves. If necessary, slightly turn the camshaft back and forth using an open end wrench.
Without Mechanical Vacuum Pump
-
Secure the position of the drive pinion for the high pressure pump using the adjustment tool (T10332).
With Mechanical Vacuum Pump
-
Secure the position of the drive pinion for the high pressure pump using the adjustment tool (T10363). The marking - A - on the on high pressure
drive cams must be at the top.