Touareg 2 V6-3.6L (BHK) (2008)
Dashboard / Instrument Panel: Service and Repair
Assembly Carrier
Assembly Carrier
Removing
-
Secure vehicle against possible rolling. The parking brake may not be used for this, because the operating mechanism will later be disassembled.
-
Select rearmost driving range position.
-
Remove center console storage compartment --> [ Center Console Storage Compartment ] See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Center Console Storage Compartment.
-
Remove center console --> [ Center Console ] See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console
-
Remove driver airbag unit --> [ Driver Airbag ] See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Driver Airbag
-
Remove steering wheel --> [ Steering Wheel ] See: Steering and Suspension/Steering/Steering Wheel/Service and Repair
-
Remove steering column trim --> [ Steering Column Trim ] See: Steering and Suspension/Steering/Steering Column/Steering Column
Cover/Service and Repair
-
Remove side instrument panel covers --> [ Instrument Panel Side Covers ] See: Instrument Panel Side Covers.
-
Remove footwell covers --> [ Footwell Covers ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Footwell Covers
-
Remove instrument shroud --> [ Instrument Shroud ] See: Instrument Cluster / Carrier/Service and Repair/Instrument Shroud
-
Remove upper A-pillar trim --> [ Upper A-Pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Upper
A-Pillar Trim
-
Remove instrument panel --> [ Instrument Panel ] See: Instrument Panel
-
Remove plenum chamber cover
-
Separate steering column from assembly carrier.
-
To ensure proper installation position when reinstalling, mark installation position vertically and horizontally on left and right A-pillar securing
brackets with an awl.
-
Depending on vehicle equipment, remove Ground (GND) cable and side fuse holder.
-
Remove nut - 1 -.
-
Remove onboard power supply control module bracket - 2 - from mounting in assembly carrier - 3 -.