Touareg 2 V6-3.6L (BHK) (2008)
‹› 2x- C - spacer pieces, 0.5 mm
‹› 1x- D - threaded plate
‹› 1x- E - mounting bolt
‹› 1x- F - mounting bolt
Prepare side panel for installation of adjustable tail lamp assembly carrier
-
Place one spacer piece positioned at center on retaining plate and mark the diameters - G - and - H -.
-
Drill holes to dimensions - G - = 8 mm and - H - = 22 mm using a center-bit.
-
Perform the required corrosion protection measures.
Installing adjustable tail lamp assembly carrier
-
Place clip mount with plastic clip nut behind mounting plate.
-
Place adjustment shims underneath as necessary, press on threaded plate with internal thread behind body plate and screw in mounting bolts so
that the carrier can still be positioned --> [ Adjustable Tail Lamp Assembly Carrier Assembly Overview ] See: Adjustable Tail Lamp Assembly
Carrier Assembly Overview.
-
Position carrier at center.
-
Tighten the mounting screws to the tightening specification --> [ Tail Lamps ] See: Specifications/Tail Lamps.
-
Install tail lamp assembly --> [ Side Panel Tail Lamps ]. See: Side Panel Tail Lamps