Touareg 2 V6-3.6L (BHK) (2008)
-
Rotate the handle - 2 - of the torque wrench 180 degrees and re-insert the bit.
-
Set the rotation direction of the torque wrench bit to "left."
-
Counterhold multi-point adapter 3400 - 1 - using open end wrench 17 mm and tighten overrunning clutch pulley by turning generator drive shaft
toward left using torque wrench - 2 -. The tightening specification is 80 Nm.
-
Clip the protective cap onto the free-wheeling belt pulley.