volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With One Piece Intake Manifold|Page 2505 > < With One Piece Intake Manifold
Page 2
background image

9

6 Nm

10

Spring-type clip

‹› Check for secure seat.

11

Air outlet duct

12

To suction jet pump

‹› Suction jet pump assembly overview. Refer to--> [ Suction Jet Pump Assembly Overview ] See: Fuel Delivery and Air Induction/Fuel

Pump/Service and Repair/Suction Jet Pump Assembly Overview

13

To Throttle valve control module (J338)

14

To compressor for air suspension

‹› Separating connection, refer to --> [ Connecting Line to Air Suspension Compressor, Disconnecting ].

‹› Depending on optional equipment, connection may be sealed with a  plug.

15

Heat shield

‹› For upper part of air filter housing.

16

6 Nm

Connecting Line to Air Suspension Compressor, Disconnecting

-

Disconnect the connecting line at the upper air filter housing-  arrow - as follows:

-

Carefully pry off the green circlip - 1 - using a  screwdriver. Then press the clamping ring - 2 - in direction  of - arrow -.

-

Pull only the slackened line - B - from the connection -  A - at the air filter.

With One Piece Intake Manifold|Page 2505 > < With One Piece Intake Manifold