Touareg 2 V6-3.6L (BHK) (2008)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor
Rear Wheel Speed Sensor
Removing
-
Raise vehicle.
-
Disconnect the speed sensor wiring connector - 1 -.
-
Remove bolt - 2 -.
-
Remove the Anti-lock Brake System (ABS) speed sensor from wheel bearing housing.
Installing
-
Before inserting wheel speed sensor, clean inner surface of bore and coat sensor completely with polycarbamide grease (G 052 142 A2).
-
Insert the speed sensor into the bore in the wheel bearing housing and tighten the bolt to 8 Nm.
-
Connect speed sensor wiring connector.