Touareg 2 V6-3.6L (BHK) (2008)
-
After removing the contact, release tool can be pulled out of terminal housing again.
Special Connector Systems
‹› If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts.
Refer to --> [ Secondary Lock ].
Faston contacts:
-
Guide the release tool which fits the terminal housing into release channel on terminal housing.
-
Grasp contact at wire and push it gently into terminal housing.
‹› By pushing contact in direction of terminal housing, retaining tabs of contact are lifted off the housing shoulder and can be released using the
release tool.
-
At the same time, push release tool in direction of terminal housing and pull the released contact out of terminal housing - arrow -.