Touareg 2 V6-3.6L (BHK) (2008)
Fluid Pressure Sensor/Switch: Testing and Inspection
Automatic Transmission Hydraulic Pressure Sensor 2, Checking
Automatic Transmission Hydraulic Pressure Sensor 2, Checking
‹› This procedure is used to diagnose Automatic Transmission Hydraulic Pressure Sensor 2 (G194)
Special tools, testers and auxiliary items required
‹› Multimeter
‹› Wiring diagram
Requirements
‹› The Automatic Transmission Hydraulic Pressure Sensor 2 (G194) fuse OK.
‹› The battery voltage must be at least 12.5 Volts.
‹› All electrical consumers must be switched off.
‹› The parking brake must be engaged.
‹› The elector lever must be in the "P" position.
‹› The Ground (GND) connections to transmission must be OK.
Procedure
-
Disconnect the Automatic Transmission Hydraulic Pressure Sensor electrical harness connector - 3 -.
-
Check the electrical harness connector for damage, corrosion, loose or broken terminals.
-
Repair any damage found to the electrical harness connector.
If the electrical harness connector is not OK: