Touareg 2 V6-3.6L (BHK) (2008)
-
Pull connector - 3 - out from the retainer.
-
Separate the connectors from the solenoids.
-
Press the securing lever toward the right and pull the switch upward out of the shift mechanism.
Installing
Installation is performed in the reverse order of removal. Pay attention to the following:
-
Route the wiring harnesses - 1 - to - 3 - as shown in the illustration.
1
Wiring harness to the shift lock solenoid (N110)
2
Wiring harness to the selector lever park position solenoid (N380)
3
Wiring harness to selector lever park position lock switch (F319)
-
Press connector - 3 - into the retainer.