Touareg 2 V6-3.6L (BHK) (2008)
/Page-915002.png)
-
The transmission fluid temperature sensor (G93) must be tightened to 10 Nm.
-
Remove valve body bolts in diagonal sequence.
Tightening Specification: 8 Nm + 90°.
-
Installation is performed in the reverse order of removal.
-
After installation, fill with ATF, check ATF level, and top off. Refer to --> [ ATF Level Checking and Filling ] See: Fluid - A/T/Service and
Repair/ATF Level Checking and Filling.
