Touareg 2 V6-3.6L (BHK) (2008)
-
Before gluing on service sealing lip, hold seal against windshield to check length.
-
Pull about 20 cm of backing - 4 - off service sealing lip.
-
Install service sealing lip - 3 - exactly to contour on edge of glass - arrow -.
-
Make sure that adhesive strip on service sealing lip is flush with the edge of the windshield.
Always apply service sealing lip from corners of windshield to center. This will enable you to make corrections (seal too long) if necessary.
-
Turn windshield over again. For a firm connection between windshield and service sealing lip, press down seal using pinch roller (3356).
New Window, Preparing For Glazing
Flush Bonded Windows
New Window, Preparing for Glazing
On all new windows, only the ceramic layer is applied. The sealing lip is injection molded.