Touareg 2 V6-3.6L (BHK) (2008)
Minimum Curing Time
CAUTION!
There are special requirements for replacing bonded windows. This includes, for example, a newly bonded windshield is safe for vehicle
operation also in case of an accident after a specified minimum curing time.
The minimum curing time for 2K adhesive DA 004 600 A2 is 3 hours for all windows.
Curing time means the time from when the window is bonded to when the vehicle is put back into use. During this time, the vehicle must stand on an
even surface at room temperature (at least 60 °F (15 °C)).
CAUTION!
The vehicle is only ready for driving after the specified time has passed.
Paint Damage, Repairing and Adhesive Sealant, Removing From Window
Flush Bonded Windows
Paint Damage, Repairing
In case of paint damage, recreate paint structure.
Adhesive Sealant, Removing from Window
-
It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Follow the safety precautions when using it.
CAUTION!
When cleaning from inside the vehicle, do not press out on the window that was just installed.
-
Wipe down the paint surfaces with a clean cloth. Remove residual adhesive with adhesive remover D 002 000 10.
-
Clean the plastic trim: let the adhesive sealant harden for approximately 1 hour and then peel it off.