Touareg 2 V6-3.6L (BHK) (2008)
Wiper Motor: Service and Repair
Windshield Wiper Motor, Removing From Wiper Frame
Windshield Wiper System
Windshield Wiper Motor, Removing from Wiper Frame
‹› If a linkage with part number 7L0.955.601.B/ 602.B or higher is installed on a Touareg through MY 2007, the plenum chamber cover must be cut
before installing --> [ Wiper Frame with Linkage, through 22.07 ]. See: Service and Repair/Removal and Replacement/Windshield Wiper
System/Wiper Frame With Linkage, Through 22.07
-
Remove hex nut - 1 -.
-
Remove crank - 2 - from wiper motor shaft.
-
Remove mounting bolts - arrows - for Windshield Wiper Motor (V).
-
Remove Windshield Wiper Motor (V) from wiper frame.
‹› If Control Module for wiper motor (J400) or Windshield Wiper Motor (V) is replaced, Control Module for wiper motor (J400) must be coded -->
[ Wiper Motor Control Module, Coding ] See: Relays and Modules - Wiper and Washer Systems/Wiper Control Module/Testing and Inspection.