Volkswagen Workshop Service and Repair Manuals > Up! > Body | General body repairs, interior | Seat frames | Front seats | Removing and installing front seat

Removing and installing Easy Entry lever

Special tools and workshop equipment required

t	Removing wedge -3409-

t	Assembly tool -3399-

Note

Removal and installation are described for the left seat. Apply the same instructions analogously for removal and installation of the right seat.

Removing

–	Remove cover cap -1- with suitable tool.

Note

Alternatively, it is possible to remove the cover caps carefully with a screwdriver.

–	Carefully remove Easy Entry lever -2- from shaft.

Note

Alternatively, it is possible to remove the lever with the assembly tool -3399-.

Installing

Note

Before installing, check all fasteners for damage and renew if necessary.

–	Install in reverse order of removal.

Volkswagen Workshop Service and Repair Manuals