Up!
Assembly overview - suspension strut, upper suspension link |
Note
t | It is not permitted to carry out welding and straightening operations on load-bearing or wheel-guiding suspension components. |
t | Always renew self-locking nuts. |
t | Always renew corroded nuts and bolts. |
t | Bonded rubber bushes can be twisted only to a limited extent. Therefore, tighten the bolted connections of components with bonded rubber bushes only when the wheel bearing housing has been raised (unladen position) → Chapter. |
1 - | Cap |
q | Allocation → Electronic parts catalogue „ETKA“ |
2 - | Nut |
q | 60 Nm |
q | Always renew after removing. |
3 - | Stop |
4 - | Front body |
5 - | Suspension strut |
q | Removing and installing → Chapter. |
6 - | Nut |
q | 40 Nm |
q | Self-locking |
q | Always renew after removing. |
7 - | Multi-point socket head bolt |
q | Tip of bolt must point in direction of travel |
8 - | Wheel bearing housing |
q | Removing and installing → Chapter. |
q | If wheel bearing housing is renewed, wheels must be aligned → Chapter |
q | Various versions |
q | Allocation → Electronic parts catalogue „ETKA“ |
9 - | Nut |
q | 70 Nm + 90° further |
q | Always renew after removing. |
10 - | Coupling rod |