Vanagon F4-1915cc 1.9L (Water Cooled) (1983)
^
measure location of belt retractor, belt guide, and mounting holes, using dimensions on Fig. 3
^
cut panel as required
^
reinstall trim panel
^
install seat belt retractor on outside of panel, as shown
^
40 N-m (30 ft.lb.)
^
hand tighten forward bolt only
^
locate, by feel, threaded hole in C-pillar (arrow) for belt guide D-ring
^
cut C-pillar trim from threaded hole, install belt guide D-ring
^ 40 N-m (30 ft.lb.)