Vanagon L4-1588cc 1.6L DSL SOHC (1983)
-
Remove tapered roller bearing inner race
Pinion Shaft Assembly
-
Heat inner race of tapered roller bearing to about 100°C (212°F) and press on to pinion shaft
-
Before tightening needle bearing inner race, let tapered roller bearing cool to room temperature
-
Heat inner of needle bearing race to about 60°C (140°F) and screw on as far as possible by hand
-
Place pinion shaft in tool 2052 and tighten wing nut lightly
-
Tighten inner race to 210 Nm (152 ft lb)