Vanagon L4-1588cc 1.6L DSL SOHC (1983)
-
replace complete shaft with new version
B - Selector shaft spring Gearshiff lever is now moved by spring pressure out of reverse/1st shift gate rather than into 2nd/3rd shift gate
-
install new selector shaft spring
Note
Large spring may be left in transmissions in which originally installed to accommodate driver's current shifting habits.
C - Selector shaft cover
^
provided with shoulder for spring to maintain proper position when assembling
-
replace cover and O-ring
Shift forks/synchronizers, modifications
^
internal repairs requiring disassembly of transmission
D - Shift forks/rails
^
2nd/3rd and 4th/5th gear shift forks/rails are riveted and welded to maintain proper alignment to each other
-
replace with new shift forks/rails
E - Synchronizers
^
2nd/3rd and 4th/5th gear synchronizers have been changed to prevent jumping out of gear
^
changes cannot be detected visually
-
replace with new version synchronizers