Vanagon 2WD L4-2109cc 2.1L (1986)
- Radio works and is coded.
Note: Radio may display frequency other than "87.9".
Reactivating Radio After Power Disconnect
Conditions
- Power to radio has been interrupted.
- Radio does not work.
- Radio displays "SAFE" when switched ON.
Work Sequence
- Switch radio ON.
- Push and hold AM/FM selector button down and then push and hold SCAN button until the display changes as shown.
- The two displays will appear one after the other.
- After blank display appears release AM/FM and SCAN buttons.
- Enter code OR personal code by pushing station selector buttons 1,2.3,4.
- For example:
‹› To enter factory code number "1111" push each button one time.
