Vanagon 2WD L4-2109cc 2.1L (1986)
-
place pad across engine mounts with tabs pointing upward
-
attach socket and handle
-
remove crankshaft pulley bolt and pulley
-
installation of three groove pulley is in reverse order
CAUTION
Tightening torque applies only when socket and handle is used in alignment with torque wrench..
Correct torque wrench setting must be calculated to achieve 350 N-m (258 ft.lb.) at crankshaft pulley bolt.
-
torque crankshaft pulley bolt to 350 N-m (258 ft.lb.)
How to compute torque when using adapter
