volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Ignition Coil|Diagrams > < Engine - Ignition Miss or Does Not Start
Page 1
background image

Ignition Coil: All Technical Service Bulletins
Tools - Inductive Coil Pickup Adapter

Subject:

VAG 1367/8 INDUCTIVE PICKUP ADAPTER AUTOMATIC SHIPMENT AT-110 (MINIMUM REQUIREMENTCALIFORNIA ONLY)

Number: V 91-04
Date: 08-MAR-1991

To simplify the method of quickly and safely connecting the VAG 1367 Engine Tester to the ignition coil on California Digifant I vehicles, a new
adapter was developed. Inductive Pickup Adapter VAG 1367/8 obtains the necessary ignition coil signal for proper operation of VAG 1367 and is now
considered minimum requirement for California dealers. When using the adapter VAG 1367/8, the ignition coil signal can be easily obtained by
clamping the adapter over the high tension wire between the coil and distributor. This non-destructive pickup eliminates damage to coil contacts,
connector housings and protective flaps that are indicative of current hookup methods.

Every participating California Volkswagen dealer in the Automatic Supply program will be shipped one VAG 1367/8 Inductive Pickup Adapter, freight
prepaid. Shipments are anticipated to commence the week of April 08, 1991, and conclude the following week. Should you decide not to receive the
VAG 1367/8 by Automatic shipment, please notify your Zone/Distributor Service Department before April 01, 1991.

Ignition Coil|Diagrams > < Engine - Ignition Miss or Does Not Start