Vanagon 2WD L4-2109cc 2.1L (1986)
-
pull seal from flange and window glass (arrows)
-
from outside place suction cups on glass
-
remove windshield
-
with plastic wedge remove rest of rubber seal and remaining adhesive to height of 1-2 mm (3/64-5/64 in.)
Note If paint has been damaged, repair before installing new rubber seal.
Installing
Work procedure
-
reinstall trim strip, if applicable
-
install seal on glass
-
place plastic cord for installing window into seal lip
-
clean sealing area around window opening
Cross section - Windshield
A = 7 - 2 mm (9/32 - 5/64 in) B = 7 - 2 mm (9/32 - 5/64 in) C = 3 + 1 mm (1/8 + 3/64 in)
-
place bead of adhesive as shown
-
reinstall windshield, checking for proper fit
Side window seal, removing/installing
