Vanagon 2WD L4-2109cc 2.1L (1986)
Power Window Motor: Technical Service Bulletins
Power Window Motor - Removing and Installing
Applies To
VANAGON
From March 1986
Group
64
Subject
Windows
Part Identifier 6452
Key Points
Power operated window motor, removing/installing
Supercedes Product Circular, Group 64, No.. 86-05
A 274
Number
86-06
December 12, 1986
Power window motor, removing
Work sequence
-
fully raise door window glass
-
disconnect battery ground strap
-
remove door trim panel
-
disconnect electrical connectors and press out window operating switch
-
carefully pull off plastic moisture barrier
-
reconnect window operating switch
-
temporarily reconnect battery ground strap
-
lower glass sufficiently to remove two hex head bolts (arrows) from regulator
CAUTION
Always use care and wear protective gloves for safety to prevent injury if glass breaks.