Vanagon 2WD L4-2109cc 2.1L (1986)
-
turn and place electric motor into position (as shown)
-
remount electric motor, guide rail and window glass
-
push window operating switch into position
-
replace tie-wrap for cable guide
-
temporarily reconnect battery ground strap and window operating switch
-
check window for proper functioning
-
disconnect battery ground strap and window operating switch
-
starting at top, carefully reinstall plastic moisture barrier, noting
^
replace if damaged
^
ensure adhesive areas are clean
^
ensure installed wrinkle free
-
reinstall all electrical connectors and window operating switch
-
reinstall door trim panel
-
reconnect battery ground strap
-
check window for proper functioning