Vanagon 2WD L4-2109cc 2.1L (1986)
Windshield: All Technical Service Bulletins
Window Rubber Seals - Glueing
Applies To VANAGON ALL
1986
Group
64
Subject
Window Glass
Part Identifier
N/A
Key Points
Glueing of window rubber seals
A223
Number
86-04
June 6, 1986
With start of production M.Y. 1986, the rubber seals for the windshield, side windows and rear lid are glued into place..
Note
To insure a satisfactory seal, use adhesive AMV 172 003 05 or equivalent specifically made for EPDM rubber.
Windshield seal, removing
Work procedure
-
remove trim strip, if applicable
-
cut through seal at area of A-pillar (as shown) CAUTION Prevent paint damage by placing piece of flat plastic (as shown) between seal and body.